Labthink
Back to Labthink

W3/062 Water Vapor Transmission Rate Test System


W3/062 is based on cup method to measure water vapor transmission rate of plastic films, foils and finished packages. It has Six independent testing cells and can be easily connected with 9 satellite systems.


  • Films
    Including plastic films, plastic composite films, paper-plastic composite films, geomembranes coextruded films, aluminized films, aluminum foils, aluminum foil composite films and many others
  • Sheeting
    Including engineering plastics, rubber and building materials, e.g. PP, PVC and PVDC
  • Paper and Paper Board
    Including paper and paper board, e.g. aluminum foil paper for cigarette packages and Tetra Pak materials
  • Textiles and Nonwovens
    Including textiles and non-woven materials, e.g. waterproof breathable fabric, non-woven fabric for diapers and hygienic products
Professional

This instrument is based on the cup method, and is professionally applicable to the water vapor transmission rate test of film specimens. It is equipped with high resolution sensor, whose test resolution is 0.0001g. The sensor also provides excellent test sensitivity.

  • Both water method and desiccant method can be used
  • Wide range and high-precision of automatic temperature and humidity control to support various combinations of non-standard test conditions
  • Standard air velocity enables constant humidity difference between two sides of test dishes
  • Automatic reset before weighing ensures accurate weighing data
  • Gas cylinder lifting structure design and periodically weighing method to reduce system errors
  • Convenient fast-access calibration ports for temperature and humidity
  • Reference film or standard weight for fast and accurate calibration
High Efficiency

W3/062 system adopts the precision design of round dish rack which is equipped with 6 test dishes and supports 6 different specimens to test individually at one operation. It can be also connected with 9 satellite bases together to accomplish up to 60 tests at the same time.

  • Precision design with high test efficiency and ultra-high system accuracy
  • 6 distinct or equivalent specimens can be tested individually with independent test results at one operation
  • The system can be easily connected to a maximum of 10 instruments to accomplish up to 60 tests at the same time
Intelligent

The instrument is equipped with the latest operating software, with user-friendly operating interface and intelligent data management functions. It also supports LystemTM Lab Data Sharing System, which ensures uniform management of test results and test reports.

  • Based on the user-friendly Windows operating interface for easy operation
  • Saves test data in different formats for convenient data transfer
  • Intelligent historical data searching, comparing, analyzing and printing functions
  • Supports LystemTM Lab Data Sharing System for uniform and systematic management of test results and test reports

This test instrument conforms to the following standards:
ISO 2528, GB 1037, GB/T 16928, ASTM E96, ASTM D1653, TAPPI T464, DIN 53122-1, JIS Z0208, YBB 00092003

Test Range 0.1~10,000 g/m2·24h (Water Method)
0.1~2,500 g/m2·24h (Desiccant Method)
Number of Specimens 1~6 with independent test results
Accuracy 0.01 g/m2·24h
Resolution 0.001 g (Customization Available)
Temperature Range 150C~550C (standard)
Temperature Accuracy ±0.10C(standard)
Humidity Range Water Method: 90%RH~ 70%RH Note1
Desiccant Method: 10%RH~98%RH Note2
Humidity Accuracy ±1%RH
Air Velocity 0.5~2.5 m/s (customization available)
Specimen Thickness ≤3 mm (customization is available for other thickness)
Test Area 33 cm2
Specimen Size Φ74 mm
Test Chamber Size 45 L
Gas Supply Air
Gas Supply Pressure 0.6 MPa
Port Size Φ6 mm PU tubing
Instrument Dimension 660 mm (L) x 580 mm (W) x 580 mm (H)
Power Supply AC 220V 50Hz / AC 120V 60Hz
Net Weight 80 kg

© 2017 Packone Solutions LLP. All rights reserved. Designed and developed by Claps and Whistles.